Exterior Trim Parts Mould
Interior Parts Mould
Lighting System Mould
Contact Us
automotive mould contact
Sino Mould Co., Ltd
Add: 369# XinJiang Rd., Xinqian Street, Huangyan Taizhou, Zhejiang, China P.C. : 318020
Tel : 0086-576-84023777
Fax : 0086-576-84018996
E-mail : commercial@cnmould.com , mould@china.com
Web : www.sino-automotive.com

 Auto side trim moulding and molds

SINO AUTOMOTIVE MOULD CO., LTD is the professional china side trim mould maker.

 

We have optimal side trim mould design and suitable side trim mould steel in order to offer customer good quality side trim molds.

 

From established year 1992 to now, we have rich experience in making plastic side trim molds, such as the threshold pressure plate mold, automotive lateral decoration mould and so on.

 

Usually, before the mold project starting, we will arrange a meeting to discuss the product design customer offered. Our product department will check the reasonability of plastic automotive side trim so that to avoid the trouble for product demoulding in the future.

 

After we received customer approval, we will start the mold design. We have many rich experienced mold designers seriously considering the mold cooling system and air venting system. In addition, we also have a new mold meeting to check the mold design. Mold project manager, mold design engineer, processing department engineer all will show in the meeting to discuss the mold design so that to ensure we could offer customer the optimal side trim mold design.

 

No matter each mold processing or mold precision inspection, we will have strict mold quality control. Take advantage of high tooling equipment, our mold precision has a strong technical support. We have bridge coordinate measuring machine and part able arm coordinate measuring machine from Hexagon which is greatly improve the precision inspection. Based on the high precision machine, our injection part has the best image and reaches customer dimension requirements.

 

Such like automotive threshold pressure plate mold, we always adopt 718H mold steel; and the perforation hole between plug and threw the installation side, we will adopt 2344 mold steel. With those suitable mold steel, our mold has the better basis. In addition, the processing cycle time about automotive threshold pressure plate mold will cost about 60 days; and normally, the mold runner is designed to side fan edge injection gate. What’s more, the high precision CNC machine work with bridge coordinate measuring machine will ensure the mold processing and slide insert dimension. Except that, we also will arrange a series of test of ageing resistance, anti- seismic test, low temperature test, high temperature test since this is automotive part has very strict requirements. Certainly, except the mold precision inspection, we also need to check the injecting product dimension inspection. Using the special inspection devices, we need to check the mating surface and gap which plays a very important in the precision inspection.

 

If you need more information about side trim molds, please feel free to contact me. 

  • Total 0 page 0 Records
分享按钮